Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/20.500.14076/14827
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorYaya Beas, Rosa Elena-
dc.contributor.authorGomero García, Pablo Elías-
dc.creatorGomero García, Pablo Elías-
dc.date.accessioned2018-11-06T16:30:14Z-
dc.date.available2018-11-06T16:30:14Z-
dc.date.issued2018-
dc.identifier.urihttp://hdl.handle.net/20.500.14076/14827-
dc.description.abstractLa presente tesis de investigación consistió en el estudio del reactor UASB (Upflow Anaerobic Sludge Blanket), el cual es usado en el tratamiento primario de aguas residuales domésticas, aplicado a la remoción de materia orgánica y sólidos. El sistema fue diseñado a escala piloto en la ciudad de Puno para investigar la remoción de la materia orgánica. Se obtuvieron muestras de la línea de alcantarillado de la "PTAR-Espinar'' y luego se llevaron hasta el lugar de investigación, sin embargo, la muestra de agua residual paso por un tratamiento preliminar (cámara de reja gruesa y desarenador). La investigación consiste en 02 etapas La etapa 1 consistió lograr estabilizar lodo anaerobio para el reactor UASB como parte del arranque. La etapa 2 consistió en evaluar el tiempo de retención hidráulico en el reactor UASB en las siguientes horas: 4-6-8-10-12-14 horas, también se evaluaron varios parámetros físicos y químicos. De la evaluación de los parámetros físicos y químicos de la etapa 02, las mayores eficiencias se lograron para el reactor UASB, con porcentajes promedios de remoción de 50.8% de carga orgánica con TRH de [6, 8, 10, 12 y 14 horas], 79.83% de turbiedad, 74% sólidos suspendidos totales (SST), 16.3% sólidos totales (ST), 12.4% sólidos disueltos totales (SDT), 43.3% sólidos volátiles totales (SVT), 62.8% DQO total, 69% DBO5, la producción de gas metano promedio para el reactor UASB es 1113 ml/díaes
dc.description.abstractThe present research thesis consisted in the study of the UASB reactor (Upflow Anaerobic Sludge Blanket), which is used in the primary treatment of domestic wastewater, applied to the removal of organic matter and solids. The system was designed at pilot scale in the city of Puno to investigate the removal of organic matter. Samples were obtained from the sewer line of the “Espinar PTAR” and then were taken to the research site. However, the sample of residual water passed through a preliminary treatment (coarse screening and Desander). The research consists of 02 stages. Stage 1 consisted of stabilizing anaerobic sludge for the UASB reactor as part of the start up. Stage 2 consisted in evaluating the hydraulic retention time (TRH) of the UASB reactor in the following hours: 4-6-8-10-12-14, also several physical and chemical parameters were evaluated. From the evaluation of the physical and chemical parameters of stage 02, the highest efficiencies were achieved for the UASB reactor, with average percentages of removal of 50.8% organic load with HRT [6, 8, 10, 12 and 14 hours] , Total dissolved solids (TSS), total dissolved solids (TSS), total dissolved solids (TSS), total dissolved solids (TSS), total dissolved solids (TSS) The average methane gas production for the UASB reactor is 1113 ml / day.en
dc.description.uriTesises
dc.formatapplication/pdfes
dc.language.isospaes
dc.publisherUniversidad Nacional de Ingenieríaes
dc.rightsinfo:eu-repo/semantics/restrictedAccesses
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/es
dc.sourceUniversidad Nacional de Ingenieríaes
dc.sourceRepositorio Institucional - UNIes
dc.subjectAguas residualeses
dc.subjectReactor UASBes
dc.subjectLodos activadoses
dc.titleEstudio del reactor UASB en la eficiencia de la remoción de la materia orgánica en la ciudad de Punoes
dc.typeinfo:eu-repo/semantics/bachelorThesises
thesis.degree.nameIngeniero Sanitarioes
thesis.degree.grantorUniversidad Nacional de Ingeniería. Facultad de Ingeniería Ambientales
thesis.degree.levelTítulo Profesionales
thesis.degree.disciplineIngeniería Sanitariaes
thesis.degree.programIngenieríaes
Aparece en las colecciones: Ingeniería Sanitaria

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
gomero_gp.pdf11,06 MBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons

Indexado por:
Indexado por Scholar Google LaReferencia Concytec BASE renati ROAR ALICIA RepoLatin UNI